IT | EN
 
 
carbon steel marcegaglia
 

STEEL
Hot dip galvanized steel sheets

The entire Marcegaglia product range of hot dip galvanized sheets divided in terms of thickness, width, grades and manufacturing standards.

Product range
Thickness (mm) Width (mm)
1000 1250 1500
0,3  
0,4  
0,5
0,6
0,8
1,0
1,2
1,5
2
2,5
3
4

Feasible length 200 ÷ 12000 mm

Manufacturing standard Product designation
EN 10346 Steel flat products for cold forming
EN 10346 Structural steels
Marcegaglia standard
STP 0074
Structural steels for construction
EN 10346 High yield strength steels for cold forming
EN 10346 Dual phase steels
ASTM A653 Hot dip zinc-coated steel
  Upon request: supply of grades not included in the above mentioned standards or grades according to customers’ standards, including major automotive manufacturers.
 
Standard delivery program
Thickness (mm) commercial sizes (mm)
1000×2000 1250×2500 1500×3000
0,4  
0,5
0,6
0,7
0,8
0,9
1,0
1,2
1,5
2,0
2,5
3,0
4,0
Technical characteristics
Covering Z50 up to Z600 g/m2
Coating is expressed in weight of zinc (g) over one square meter of product (total of two sides).
Surface
finishes
A (normal appearance)
Standard finish for industrial use

B (improved surface)
Skinpassed surface

B1 (smooth)
Smooth cylinder skinpass

B2 (bright)
Double smooth
cylinder skinpass

C (superior)
Highest standard of finish

Surface
appearances
N – Normal spangle

M – Reduced spangle

Surface
treatments
Oiling
Surface protection from oxidation, with improved suitability for plastic deformation.

Chromating
Chromate conversion
coating resulting in the formation of a passivating film.
Only trivalent chromium
is employed.

Ecorsteel®
Transparent or semi-transparent organic coating with special protective, lubricant
and antifingerprint properties.
Available for thicknesses
up to 1,4 mm.

Supply conditions

• Tolerances according to EN 10143
  (and other equivalent international norms)

• Special tolerances upon request

• Control documents 2.1, 2.2, 3.1, 3.2 according to EN 10204
  and other specific norm requirements

  Carbon steel flats - headquarter - Marcegaglia

MARCEGAGLIA sheet division
via Bresciani, 16
46040 Gazoldo Ippoliti, Mantova - Italy
phone +39 . 0376 685 506
fax +39 . 0376 685 632
lamiere@marcegaglia.com

linea_separatrice